Book

 

Were you trying to locate ideas around How to Troubleshoot and Repair an Electric Water Heater?

Many contemporary homes take advantage of an electric hot water heater for their heater, as a result of its convenience and simplicity of use. Nevertheless, just like any other electrical appliances, troubles might occur with its usage, unexpectedly. It can be really frustrating to wake up to a cold shower instead of a hot one or having your bathroom with water that isn't hot sufficient or perhaps too warm. Whatever the instance might be, hot water heater issues can be quite aggravating. Thankfully, we've made a checklist of feasible services to your water heater problems. There are a number of variables that might cause much of these issues, maybe a concern with the power supply, the electrical burner, or the thermostat. Prior to doing anything, guarantee you shut off the main power supply for safety and security. Whatever the issue is, getting it dealt with ought to not present too much of a concern if you comply with these actions:

 

Call An Expert:

If after replacing all malfunctioning components and resetting your temperature, the hot water heater still isn't working, you may require to contact a specialist plumber for a professional point of view. The trouble with your heating unit could be that the cold and hot taps have been changed or it might be undersized for the quantity of warm water required in your home. Whatever the case may be, an expert plumber would certainly help resolve the trouble.

 

Examine Your Power Supply:

As basic as this may appear, it is very needed. Without ample power, your water heater will not operate. So the first thing to do when your water suddenly stops working is to confirm that it isn't a power issue. Examine if the fuse is blown out or the circuit breaker tripped. If the breaker is the concern, simply turn it on and off again. Replace any type of busted or worn-out fuse. Evaluate the device with power after these changes to see if it's now functioning.

 

Examine Your Thermostat:

If your water heater still isn't functioning or the water appearing isn't hot enough, you may need to examine the temperature settings on your upper thermostat. Make sure the circuit breaker is turned off prior to doing anything. Open the access panel as well as press the red switch for temperature level reset above the thermostat. This ought to aid heat the water. Transform the breaker back on as well as inspect if the issue has been fixed.

 

Inspect the Heating Element in the Hot Water Heater:

If it's not a power trouble, after that attempt having a look at your heating element if it is still working. Check each of your burner to ensure the trouble isn't with any of them. If any of them is malfunctioning, replace that part and after that inspect whether the hot water is back on.

 

Final thought

Hot water heater troubles are not always major. A lot of them are because of minor issues like a blown fuse or worn-out heating element. Replacing the faulty parts should do the trick. Nevertheless, if you are still incapable to fix the issue, give a call to your local plumber to find to get it taken care of.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

We hope you enjoyed our topic about Hot Water Heater Repair. Many thanks for taking the time to read our article. Do you know another person who is involved in the niche? Why not promote it. I cherish reading our article about What Would Cause My Electric Water Heater to Stop Working?.

Plumbing emergency? We're ready.